Contact
High-quality product compatibility of ISOLED®
COVER SQUARE
COVER ROUND
Article 114555
LED recessed wall light Sys Wall 68, 3W, 230V AC, color switch, including surface box
COLOR SWITCH
Installation depth: 54 mmProtection class: IP44
114555
Required hole cutout: 59 mm
Click here for the product
Installation depth: 54 mm
LED recessed wall light with integrated driver
(protection class 2) | IP44
Color Switch:
Switch either at 3,000 K | 4,000 K | 6,000 K
Two-pole sheathed connection cable
15 cm with open stranded wire
Color Switch Technology | Color temperature selectable
The SYS WALL 68 recessed wall light described here is based on COLOR SWITCH technology. This means that with these items, you can choose between three different color temperatures at any time by pressing the dip switch. Namely between warm white, neutral white and cold white.
Article 114682 | 114683
LED recessed wall light Sys Wall 68, 3W, 24V, 3000K, including surface box
Required hole cutout: 59 mm
Installation depth: 54 mm
Including 100 cm connection cable
with MiniAMP plug
PWM dimmable
No specialist electrical
work necessary
NEw
LED recessed wall light
with PIR motion sensor
SYS WALL 68 optional
switchable with motion detector
REPLACEABLE COVERS WITH MAGNETS
High quality product compatibility of ISOLED®
recessed luminaire + 6 selectable covers
The LED recessed wall light with PIR motion sensor can be set to warm white, neutral white or cold white in advance using a dip switch.
6 covers are available for your individual look.
Covers can be swapped out at will.
square
black
115608
square
black
115610
square
black
115612
square
white
115607
square
white
115609
square
white
115611
SYS WALL 68 optional
controllable with motion detector
motion detector
230 V AC or 24 V DC
Design possible
In our product range you will find ambient light triggered
• HF motion detectors (24V or 230V nominal voltage) for concealed installation
•ready-to-plug-in PIR sensor heads and corresponding MiniAMP connection cable distributors
•location-independent as well as battery-operated motion sensors that transmit the switching signal via radio to a 24V or 230V receiver
REQUEST PROFESSIONAL
ADVICE NOW
ADVICE NOW
