Contact
CONVERT FLUORESCENT TUBES TO LEDS - THE TIME HAS COME FOR BETTER LIGHT!
Many lighting systems in companies, warehouses and old buildings are still equipped with the lighting technology of decades gone by. There is hardly a better time to switch to LEDs, because fluorescent lamps will finally be phased out at the end of August 2023.
A solution for every luminaire
We offer a wide range of options when it comes to replacing your old lights with LED.
Top technical advice
Our experts will be happy to support you quickly and competently in the implementation of your lighting renovation.
More light for less money
In many cases, switching to LED is eligible for federal, state or local funding.Fluorescent tube ban 2023 - Switch to LED now!
The EU directive ROHS (Restriction of the use of certain Hazardous Substances in electrical and electronic Equipment) will put an end to T8 and T5 fluorescent tubes in summer 2023. Although the use of mercury in electronic equipment had already been banned, exceptions had previously been made for T5 and T8 fluorescent tubes and compact fluorescent lamps without ballasts. The ban now opens up the opportunity for companies to switch to energy- and cost-efficient LED lighting. ISOLED offers you a wide range of possibilities how to design the conversion - according to your individual requirements and conditions.
All tube replacement solutions for your operation at a glance
Thanks to our wide range, we can offer you LED lights for all sectors of your business, whether indoors or outdoors.
Customised
LED solutions also
possible!
LED solutions also
possible!
Easy replacement option for Odenwald grid ceilings with LED panels
With our LED panels, we offer you a practical replacement for one- to four-lamp fluorescent tubes. Customised solutions are also possible for your specific project.
With the help of our surface mounting frame, you can also carry out a quick installation. A particular advantage of our panels is the reduced glare with a UGR<19!
To the products
Retrofit solutions for T8 tube replacement
LED tubes KVG compatible
A simple solution for the replacement of old T8 tubes is the retrofit replacement with starter bridge. Note: Funding is not possible here, or only to a limited extent, as the tubes are considered illuminants.
To the products
LED tubes with cable
This is a simple retrofit replacement with external connection cable. Note: Funding is possible depending on the funding agency, as the tube is considered a luminaire and not an illuminant.
To the products
Magnetic or glue-in: Rigid LED retrofit circuit board
A conceivably simple way to replace a luminaire body that previously contained a fluorescent tube. The retrofit circuit board is available with approx. 55 cm, 85 cm, 115 cm and 145 cm and can be individually shortened every 5 cm. Replacement is made even easier with our ready-to-plug MiniAMP system.
TO THE PRODUCTS
FastFix R UniversalFit
Keep your consisting system unchanged and click in the new luminaire easily and quickly with our FastFix linear system.
Linear luminaire - surface-mounted replacement for single-flame luminaires
Our linear luminaires are only 140 mm wide and are therefore ideal as a surface-mounted variant for replacement with the old tube.
Perfect replacement for grid lights with fluorescent tubes, because: phase-out of T8 fluorescent tubes from 01.09.2023 according to ecodesign regulation 2019/2020/EU
Glare-reduced with prismatic surface beam angle 100° or as UGR<19 variant (beam angle 80°) with diffuser lenses
linear connectable and 3-pole through-wireable
Particularly variable due to integrated ColorSwitch 3000|4000|5700K
LED Linear and Tri Proof Luminaires
From a range of over 30 products, you can choose the perfect LED replacement for your application - whether with Powerswitch, Color Switch, ammonia resistant or impact and shock resistant.
To the products
LED retrofit circuit board
For already installed downlights and luminaires.
Convert to high-quality LED technology easily and cost-effectively.
NO DRILLING | NO SCREWING | MAGNETIC HOLDER
TO THE PRODUCTS
Customised LED light stripes
We assemble LED elements according to your specifications (dynamic white, RGB+W) as retrofit replacement.Learn more!
Why switch to LED?
There are many good reasons for switching to LEDs: not only are they far more energy-efficient than conventional illuminants and therefore cheaper to operate, but they also have a much longer service life and are therefore more sustainable. In addition to being highly economical, LED lighting can massively improve lighting conditions in buildings. This not only serves general safety, but also promotes well-being and productivity in the workplace. Last but not least, the use of LEDs also means a high degree of flexibility, for example, in terms of dynamic white, dimmable or color-designed lighting solutions.
5 years guaranteed quality from ISOLED®
Increase efficiency & save costs
Improve light quality & conserve resources
Convert office to LED
SAMPLE CALCULATIONSSubstantially improve the working environment in the office by switching to dynamic white LED panels.
This will not only produce more light, but also
halve
the energy consumption ! All details can be found in our sample calculation, based on an electricity price of 0.4 € per kW/h.
* 2,080 operating hours / year
0.4 € kW/h
Before
T5 fluorescent
luminaire
four-flame
After
LED Panel HCL Line
UGR<19 | CRI90
white dynamic| DALI DT8
| conventional Illuminants |
LED illuminants from ISOLED® |
|
| Acquisition costs | - | 449,3 € |
| Maintenance effort | 36,6 € / year | - |
| Electricity costs | 768,8 € | 179,7 € |
| annual net savings* | 625,7 € | |
More light, less energy consumption!
0.6 years payback period
€625.7 per year net savings
907 kg CO² per year corresponds to 73 trees planted
Open detailed calculation
Convert underground car park to LED
SAMPLE CALCULATIONSIn this example, we illustrate how using long-lasting LED Tri Proof Luminaires instead of T5 fluorescent tub luminaires
can reduce your energy consumption by up to 25%
while providing much better illumination. The calculation is based on an electricity price of 0.4 € per kW/h.
* 7,280 operating hours / year
0.4 € kW/h
Before
T5 fluorescent lamp single flame
After
Tri Proof Luminaire Powerswitch
| conventional Illuminants |
LED illuminants from ISOLED® |
|
| Acquisition costs | - | 19.980,0 € |
| Maintenance effort | 1.856,0 € / year | - |
| Electricity costs | 37.273 € | 25.625,6 € |
| annual net savings* | 13.504,0 € | |
Better illumination, less energy consumption!
1.5 years payback period
€13,504.0 per year net savings
17.938 kg CO² per year corresponds to 1435 trees planted
Open detailed calculation
Frequently asked questions
LED lighting is a recommended upgrade to traditional lamps in many ways. They are more durable, have lower energy consumption and are environmentally friendly. LEDs also have lower heat generation, are extremely robust, and are both dimmable and available in diverse color spectrums.
Send us your inquiry!
We realize your project!A solution for every luminaire
Top technical advice
More light for less money
We advise you!
» Personal advice
» Individual light planning
» Project-full-service