Contact
HIGH CONTRAST COLOR REPRODUCTION
HIGH QUALITY OF LIGHT
EXCELLENT, AREA-WIDE ILLUMINATION OF THE PLAYING FIELD (MINIMUM LIGHT SCATTERING LOSSES)
SPECIAL REQUESTS POSSIBLE ON REQUEST
Application example
Project - full - service
We accompany you from the lighting calculation to the project completion and commissioning of your new LED lighting system.
More information
What are the requirements for ski slope lighting?
The photometric requirements depend on the lighting class.
The DIN 12193 standard "Light and lighting - Sports facility lighting" specifies precisely what requirements a floodlighting system for ski slopes must meet. Orientation to the standard is also a prerequisite for the payment of subsidies. The graphic shows excerpts from the standard applied to floodlighting systems for ski slopes:
The calculation grid specifies the arrangement of calculation and measurement points and their number in each direction of the reference surface of the main surface. The calculation grid is also used to check compliance with the set requirements for a new LED lighting system.
Illuminance
Horizontal illuminance is measured at ground level. There are requirements that, for the total area of the ski slope, the illuminance must reach ≥ 75% and the uniformity ≥ 75% of the value of the main area.
Glare & colour rendering
For the glare rating, a maximum GR value of 55 should be achieved. The GR (Glare Rating) is a calculation method for glare in outdoor areas. It is also important that the lighting ensures a high colour rendering index.
APPLICATION EXAMPLE WITH LIGHT PLANNING
PROJECT: Ski slope
SIZE OF SLOPTES: W: 30 m | L: 125 m
REQUIREMENTS: Lighting class III
Products
For the application example shown here, a requirements profile based on the standardised specifications according to Light and lighting - Sports facility lighting; DIN EN 12193:2019-07 (Germany EN 12193:2018) was used.
About the floodlights
4 Poles
EACH WITH A LOAD
OF 20KG DESIGNED FOR
WIND ZONE 3
Pole height 8m (cantilever
not necessary)
Contact us!
We realise your project for you
Checklist
With our checklist you can quickly get an overview of the most important key points for planning your project.
>> Download now for free <<
ISOLED® FLOODLIGHT | Top LED LIGHT QUALITY
High contrast color reproduction
Asymmetrical beam angle - avoidance of stray light
High long life use
5 years warranty
To our products
Further information
Light poles
Floodlight pole conical with traverseOur light poles consist of an unshaped and longitudinally
and longitudinally welded steel sheet, which is produced with a
steel quality of S235 JR and hot-dip galvanized according to DIN EN ISO 1461 hot-dip galvanized.
Delivery free of freight charges for 4 poles or more
Poles are dimensioned specifically for the project
We make foundation suggestions when purchasing ISOLED® poles
FLYER
LED lighting systems for sports fields and ski slopes
TO THE DOWNLOAD
REQUEST INFORMATION MATERIAL
